Intended for light traffic pavements. It is characterized by high hardness, which allows the optimization of the overall behavior of the pavements against its various uses, thus prolonging the durability of the concrete.
Intended for intense heavy traffic and high abrasive wear (rolling, sliding and pressure forces) with consequent high resistance to severe impacts.
Resulting from the mixture of charred milled steel particles, to cope with oxidation, and coarse corundum mineral aggregates, they provide pavements ideal for heavy traffic, with consequent high wear.
These fibers allow to control and reduce the plastic deformation in the shrinkage and the establishment phases of the concrete, giving them greater chemical and mechanical resistance, thus increasing its durability and quality.
These fibers allow optimum anchorage to the concrete, forming a reinforced concrete with high load capacity and ductility. They are of easy and quick application, creating an efficient solution of mechanical resistance in concrete pavements.
Self-leveling, single component cementitious mortar for regularization of indoor supports, applicable in layers of 0-5mm and 5-10mm.
Self-leveling, single component cementitious mortar for regularization and finishing of indoor supports, applicable in layers of 3mm to 10mm.
Self-leveling, quick-drying single component mortar for regularization and finishing of indoor supports, applicable in layers of 3mm to 10mm.
Epoxy bicomponent product that eliminates the formation of drain, when applied vertically, and rebates after drying, when applied on pavements. Ideal for the formation of half pipes.
Two-component Epoxy colored product indicated for the formation of half-pipes in the RAL color of the final pavement.
Two-component product indicated for the filling of workability joints, which cannot be covered with the final coating.
Self-leveling mortar based on a cement and aggregates mixture, selected for indoor finishing, applied to a minimum thickness of 1cm. With polished finishing.
Self-leveling single-component colored cement mortar for finishing of interior supports, applicable in layers from 3mm to 10mm.
Monocomponent mortar, ready to be applied, to develop continuous decorative floor coverings and walls.
Bicomponent mortar, to develop continuous decorative pavement coverings, with high aesthetic performance and excellent mechanical and chemical resistance.
Two-component mortar, to develop continuous coatings for surfaces with permanent contact with water (for example: swimming pools), with high aesthetic performance and excellent mechanical and chemical resistance.
Monocomponent mortar, to develop continuous coating of exterior facades, with high aesthetic performance, impermeable to contact with water and high resistance to cracking.
An antimicrobial polyurethane based cementitious mortar that develops a continuous 6 to 9mm thickness floor, with a coarse textured finishing.
Polyurethane based cementitious mortar, antimicrobial, that develops a continuous flooring for wet areas of thickness 6 to 9mm, with a durable thick textured finishing.
Polyurethane based cementitious mortar, antimicrobial, that develops a continuous floor of 4 to 6mm thick, with a durable smooth or textured finishing.
Polyurethane based cementitious, antimicrobial, developed for sanitary curves and half-pipes that provides a smooth colored finish.
Self-leveling quick-drying single-component mortar, for regularization and finishing of indoor supports, applicable in layers from 3mm to 10mm.
Fluid cementitious mortar, slightly expansive, monocomponent, applicable in layers from 10 to 30 mm. It’s a product for anchorage.
Transparent or pigmented bicomponent epoxy product that allows incorporating high content of aggregates, namely quartz sands and to develop epoxy mortars with variable thicknesses from 3 to 8mm.
Colorless quartz sands with no dust present. They allow their use outdoors without color change as well as sanding without pigment release.
Universal epoxy bicomponent product, applied in different substrates of a cementitious nature, allows different regularizations and repairs of substrate.
Two-component epoxy primer system with moisture-blocking effect on cementitious substrates, compatible with contaminated supports with high moisture content. It allows different adjustments and repairs of substrates in areas with a temperature of 0 °C.
Low viscosity, two component epoxy product, applicable in cementitious subtracts, used for concrete consolidation.
Aqueous-based two-component epoxy product, suitable for aqueous epoxy coatings systems.
Two-component epoxy product with adhesion to metal supports.
Bicomponent epoxy product compatible with supports contaminated with grease.
Adhesion promoter and dust sealer for mortars.
Glazed and non-porous surfaces adhesion promoter product for cementitious mortar systems.
Self-leveling Epoxy with high mechanical resistance É um ligante Epoxy colorido de dois componentes, sem solventes. Produto de Viscosidade média para utilização na execução de pavimentos decorativos.
Epoxy paint for floors and walls É um revestimento Epoxy colorido de dois componentes, sem solventes de alto conteúdo em sólidos, para o recobrimento de pavimentos industriais de betão e base cimenticia.
Resilient PU Coating System. Two component, self-leveling, high solids content, colored coating specially formulated for the development of floors with high thermal, acoustic and shock absorbing performance.
Polyurethane based, self-leveling, flexible, bicomponent product with moderate viscosity and easy application. It has the function to create a buffer layer for coating later.
Flexible polyurethane based bicomponent product, allows the development of a self-leveling, flexible and fluid finishing, of easy application, with option of colors according to the RAL catalog.
Coating system for outdoor sports floors.
Polyurethane based, aqueous bicomponent product with matte, satin or gloss finish. It is a waterproof sealant compatible with different subtracts of a cementitious or resinous nature.
Single component inorganic binder for the consolidation and conservation of natural and artificial stones with absorbent properties. Excellent surface reinforcement of cementitious base coatings.
Nano lithium particles in aqueous dispersion based densifier. Indicated for the hardening and protection of new and old concrete floors. Creates harder surfaces, reduced dust and ease in the floor cleaning process.
It is a product that incorporates synthetic resins and solvents. It is used to control the curing process of fresh concrete, minimizing uncontrolled cracking caused by material retraction.
12mm synthetic wool roll, resistant to solvents.
18mm synthetic wool roll, resistant to solvents.
5mm synthetic wool roll, without hair release.
Adjustable metal bracket for rolls.
8mm in diameter galvanized steel roller bracket, with 25cm M8 thread, and fixing with locking end.
25cm wide roll protection.
Extensible metal cable: 75 to 150cm, 150 to 300cm, 200 to 400cm.
25, 50 and 100cm wide, 11mm high plastic spikes roll.
Rolo de picos de plástico de 25, 50 e 100cm com altura de picos de 21mm.
25cm metallic spikes roll.
50cm metallic spikes roll.
Rectangular metal spikes roll guard, to avoid splashes.
Spiked shoe, with pointed bolts, for use during self-leveling application.
Spiked shoe, with flat bolts, for use during the sealing application. Note: Tightening tapes and spikes can be purchased separately for each pair of shoes when worn.
Squeegee to spread the product.
Stainless steel trowel, with wooden rod.
V-notched blades.
Stainless steel floor squeegee, with possibility of use of a 24mm diameter rod.
Blade in hardened stainless steel, curved plywood bracket with handle and bore holes for extender.
Aluminum squeegee with adjustable pins.
Metal bracket with double foam rubber (sponge).
Aluminum squeegee, that allows to incorporate neoprene rubber in sealing application.
Wide stainless-steel trowel, with a rounded blade on both sides.
Trowel with a hardened stainlesssteel blade.
Stainless steel sheet 1.0mm
Stainless steel cast and polished blade trowel.
Double-sided corrugated stainless-steel blade with sloping edges.
Impact resistant PVC trowel, for decorative finishings.
40mm of thick wooden squeegee, with 5mm white rubber.
The rake is a strong and durable instrument consisting of a long wooden rod attached to a metal spiked crosspiece. It is used to spread the concrete.
The squeegee is a cleaning tool composed of a soft rubber strip embedded in a wooden rod, used to reverse or control the flow of a liquid on a smooth surface.
Stirring rod with good homogenization capacity even in small quantities for thick cementitious mortars with high viscosity and high content of aggregates.
Suitable for mixing and stirring: Epoxy resins, two-component material, plastics, fillers, adhesives, glues, pastes.
Suitable for blending and stirring: two-component resins such as epoxy, polyester and acrylic resins.
100, 200, 400, 800, with 100mm diameter.
Diamond grit number: 20/30, 50/60, 100/120, com diâmetro de 125mm.
50, 100, 200, 400, 800, 1500, 3000
Diamond grit number: 20/30, 50/60, 80/100, 120
Abrasive discs for cleaning and maintenance of floors. From 11” to 20” diameter.
Vibrating ruler with swinging handle. Very light and easy to handle. Used to vibrate and smooth concrete floors. Provides smooth, pore-free concrete surfaces for easy finishing.
The “Mosquito” is an equipment with a Ø 600 disk, indicated for narrow areas, like next to walls. It has an articulated arm for greater ease and reduction of transport space with the disk fixed on.
Equipment with a short handle and a 4 bladed Ø 900 spatula, used in medium areas for concrete coatings.
Equipment with a short handle and a 4 bladed Ø 1200 spatula, used in medium/large areas for concrete coatings.
Specially designed machines for large areas, with adjustable seat for operator comfort. Faster and more comfortable.
Joint cutter that makes depth cuts on concrete floors. Ø Diamond discs: 300-350-400mm. Manual feed.
Coating system for indoor sports floors.
